More than 15 years ago the first HSC-machines were developed by Roeders. They were produced exclusively for the Roeders tool shop. Some machines made at that time are still in use. The most important development was the new Roeders control. It's data processing time was more than 100 times shorter than those of any other control available on the market. Therefore it was the only one which was fast enough to process the very large quantity of data of complicated curved CAD-surface for milling in high speed. Not only the control but also the machines and the drive controls were at that time and still today are developed and tuned to each other by Roeders engineers. The Roeders machines are developed as a whole system. This is the most important advantage of Roeders HSC-machines compared with otheres which are only equipped with controls of other manufacturers. The Roeders control does not need to be adapted to the machine which would always mean to compromise. That's why precision and dynamics of Roeders machines are unsurpassed until today.

There is no other company in the world with such an long experience in High Speed Cutting. The combination of development and practical use of the machines in the own tool shop is unique and gives an outstanding expertise which can hardly be found elsewhere. The Roeders technology and developments are based on it. This is a warranty for performance. A large number of registered patents are the result of the application of High Speed Cutting in the Roeders mold shop

Product Range

Roeders offers 11 models of high speed milling machines (machining centers). An exceptional rigid cast iron construction optimized by the finite elements method results in high stability and vibration free machining. The advanced Roeders technology is without question state of the art.
 

• Linear drives in all axes for highest dynamics and stiffness.
• Standard 50000 rpm,3,4 kW, HSK E25(For RXP 300)
• Standard 42,000 rpm, 14 kW, HSK E40(For RXP 500)
• Standard 36,000 rpm, 17 kW, HSK E50(For RXP 800)
• Up to 40 m/min feed rate at the work piece.
• Roughing and finishing of hardened steel, copper, aluminum and graphite.
• Spindel growth compensation with high precision sensor available.
• Cooling of linear drives and milling spindle for highest accuracy.

top

• Standard 42 000 rpm, 14 kW, HSK E40(For RFM 600 and RFM 760).
• Standard 36,000 rpm, 17 kW, HSK E50(For RXP 800)
• Up to 30 m/min feed rate at the work piece.
• Patented sealing of all machine elements, therefore also ideally suitable for machining of graphite and other dust-creating abrasive materials without retooling, additional extraction equipment and other forms of restrictions.
• Temperature stabilization of the complete machine frame for highly accurate production, water-cooling of bearings and spindle nuts as well as the milling spindle by means of an extra cooling sleeve.

• Bridge type design with 2 axes rotary table integrated into the X-axis.
• High dynamics and high stiffness of rotary axes with torque drives. 
• Dynamic 5 axes machining available .

top

• Extremely stiff design for swivel and rotary axis with counter bearing and special frame construction, for highest dynamics and precision.
• Direction of swivel axis at right angles to the X axis, therewith dynamic decoupling of the movements of the two axes.
• Standard 42 000 rpm, 14 kW, HSK E40.
• Up to 40 m/min feed rate at the work piece.
   

• High Speed Cutting with very high precision.

• Standard 36,000 rpm, 17 kW, HSK E50.

• Up to 60 m/min feed rate at the work piece.

• 3D measurement, jig grinding.

• Linear motors.

• Hydrostatic guide ways in all axes.
   

top

Click here to view work piece samples